• +86-792-8352066
  • jjyixin@jjyixin.cn

Tag Archive manual tin can making machine

10-25LConical Round Can production line Sent To Russia

10-25LConical Round Can production line Sent To Russia

→ You can look at the machine ←

How to master PLC from scratch (I) Fully automatic can making machine

Fully automatic can making machine,

How to master PLC from scratch (I)Fully automatic can making machine

PLC in the eyes of people who now understand, is indeed a relatively simple thing, after all, it belongs to the application type of secondary programming development.But as a zero – based beginners, to learn PLC, or to pay a certain amount of time to explore.Must first understand PLC is the relay circuit of the software, and the nature is to draw on the computer relay circuit diagram, this is the basis of it, so before learning PLC, you must be a little electrician foundation, to understand and use the use of a relay circuit, this is very important, after all, the PLC software is to simulate the hardware circuit.

 

Beginners master PLC program upload and download, this is the first step.

Because the PLC peripheral circuit has been installed, as long as a PLC Y point such as Y4 set, Y4 corresponding lights will be lit up, with universal can be measured to an output contact signal.Mitsubishi is total Yang, as long as the public end of the PLC COM met some X point, such as X1, the X1 will be light, and inside the PLC have X1, the quantity of state, the state will become a high level, to let the X1 this normally open point to connect to an intermediate relay coils of M1, M1 will be “charged”, M1 control normally open contacts will be off, the relay control circuit and offline.So when you’re programming, it’s exactly the same thing as if you were drawing a trapezoid below the line.If a beginner understands this point, he is on the threshold.

Fully automatic can making machine

Fully automatic can making machine,

Stainless steel or stainless iron?round tin can making machine

round tin can making machine

Stainless steel or stainless iron?Tin can making machine          

316 and 316L stainless steels are molybdenum-containing stainless steels.The molybdenum content of 316L stainless steel is slightly higher than that of 316 stainless steel.Due to the molybdenum in steel, the steel is superior to 310 and 304 stainless steels in overall performance. 316 stainless steels have a wide range of USES under high temperature conditions when the concentration of sulfuric acid is lower than 15% and higher than 85%.316 stainless steel also has good chloride erosion properties, so it is commonly used in Marine environments.The maximum carbon content of 316L stainless steel is 0.03. It can be used for welding purposes where annealing is not possible and where maximum corrosion resistance is required.

1. Corrosion resistance

The corrosion resistance of 316 stainless steel is better than that of 304 stainless steel.In addition, the 316 stainless steel is resistant to Marine and corrosive industrial atmospheres.

In general, 304 stainless steel and 316 stainless steel in terms of chemical corrosion resistance is not much different, but in some specific media under the difference.Initially developed for 304 stainless steel, in particular cases, the material of Pitting Corrosion, Pitting Corrosion) is more sensitive.Adding an additional 2 to 3 percent of molybdenum can reduce this sensitivity, resulting in 316.In addition, these additional molybdenum can reduce the corrosion of certain thermoorganic acids.

316 stainless steel has almost become the standard material in the food and beverage industry.Due to the worldwide shortage of molybdenum and the higher nickel content in 316 stainless steel, 316 stainless steel is more expensive than 304 stainless steel.

2. Heat resistance

316 stainless steel has good oxidation resistance for intermittent service under 1600 c and continuous service under 1700 c.In the range of 800-1575 degrees, it is best not to continuous action 316 stainless steel, but in the temperature range outside the continuous use of 316 stainless steel, the stainless steel has good heat resistance.The carbide resistance of 316L stainless steel is better than that of 316 stainless steel, which can be used in the above temperature range.

3. Heat treatment

Annealing in the 1850-2050 temperature range, then rapid annealing, then rapid cooling.316 stainless steel shall not be hardened by overheating.

can machine,can making machine,tin can making machine,can production line,can sealing machine,can seaming machine

round tin can making machine

GT4A28Q Pneumatic tin can sealer/tea can machine

The machine/tea can machine, using four rollers, can seal mental cans with various shapes and sizes just by manually putting the can, feeding by air cylinder and positioning. It’s the ideal equipment of can making line.tea can machine

tea can machine

tea can machine

tea can machine

GT4A28Q Pneumatic tin can sealer/automatic can making machine

The machine/automatic can making machine, using four rollers, can seal mental cans with various shapes and sizes just by manually putting the can, feeding by air cylinder and positioning. It’s the ideal equipment of can making line.automatic can making machine

automatic can making machine

automatic can making machine

1-10L can automatic rounding welding/capacitor can making machine

This welding machine/capacitor can making machine is suitable for making metal can body, which is a full automatic can making equipment integrating automatic rounding and welding. Equipped with the electromechanical integrated intelligent control system, the equipment cans type adjustment is the simplest, high production efficiency, convenient operation, stable welding quality, firm and beautiful welding seams. It is the most ideal automation equipment in the food and chemical can making industry.
capacitor can making machine

capacitor can making machine

capacitor can making machine

Inside & Outside Lacquering machine/machine for making tin can

This metal can making production line /machine for making tin can is mainly used for the internal and external welding line coating of 1l-25l chemical cans and food cans, and the conveying bracket is made of specially customized heavy aluminum alloy. It is mainly used to prevent rust at the weld.

machine for making tin can

machine for making tin can

machine for making tin can

Automatic Tandem Disc Shearing/manual tin can making machine

The automatic slitting machine/manual tin can making machine is suitable for high-precision shearing tinplate in can making enterprises. It is a shearing equipment that must be equipped with high-speed resistance welding machine. Cutting precision, when the cutting knife needs to be sharpened, no need to remove the knife, just add a grinding machine to the circular shear can be sharpened.

manual  tin can making machine

manual  tin can making machine

Jiu Jiang Yi Xin Machinery Co., Ltd.

Jiu Jiang Yi Xin Machinery Co., Ltd. is located at the intersection of Yangtze River and Beijing-Kowloon Railway in Jiu Jiang City, Jiang Xi Province China. Tourist summer resort, Lu Shan Mountain just back of Jiu Jiang City, Jiu Jiang Yi Xin Machinery Co., Ltd is one company concentrate on Research and Development, Design, Manufacturing, Sales and services metal packing machinery manufacturer.

Jiu Jiang City is one of China’s Light industry machinery manufacturing center, has a long history of production, strong technical foundation and rich business atmosphere. Since it opened Jiu Jiang Yi Xin Machinery Co., Ltd. give full play to unique geographical advantages, specialized in R & D of metal can packing machinery and other light industry products. Step by step developed itself to one of main automatic tin can machinery manufacturing enterprise which focus on machinery, photo-electricity, intelligent machine. Company occupation of land 20,000 square meters, built modern plant, R & D center and office building. Possessed first-class R&D and Engineering teams with excellent processing equipment. In recent years,other than continuously provide good quality tin can machinery to clients in domestic and overseas, also designed automatic lines for round cans, rectangular cans and conical pails. These new designed production lines have good stability,high automation level, high Efficiency Productivity, high cost performance. Replaced similar oversea imported product. Thus let company zooming to advanced level of domestic tin can machinery industry, and one of the main mainstay enterprises in China.

Since the company opened adhere to the “customer first, quality first, good faith, innovative development” principles. To realize making fine machinery, build century enterprise, continuously using advanced technology and equipments, provide high quality products and services to our customers. Warm welcome domestic and foreign customers, calls, letter ordering negotiations the company’s products, welcome throughout the guide!