• +86-792-8352066
  • jjyixin@jjyixin.cn

Tag Archive automatic can making machine

Semi-automatic tin can making machine-Semi-automatic tin can making machine

A newly assembled laundry and toilet soap production line is being tested in our plant before delivery.(Semi-automatic tin can making machine)

—–China Jiujiang Yixin Technology

→ You can look at the machine ←

can production line servo motors and applications

can production line

can production line servo motors and applications

Now, more and more servo motors are used in the equipment of can making.The popularization of servo motor greatly reduces the transmission system of the equipment and makes the control more convenient, fast and accurate.So what is a servo motor?Here is a popular science.

Servo motors, also known as execution motors, are used as execution elements in the control system to convert the input voltage control signal into the output angular displacement and angular velocity on the axis to drive the control object.Its biggest features:

The rotor rotates immediately with control voltage and stops immediately without control voltage.The direction and magnitude of the control voltage determine the direction and speed of the shaft.Can be divided into dc servo motor and ac servo motor.The motor consists of a stator, a rotor, an encoder and a housing.The speed can be controlled by changing the control voltage.The main function of the driver is to output the control voltage proportional to the given signal, receive the speed and position signal of the encoder, and I/O signal interface.

Ac servo motors should be used in general automatic control applications as far as possible.Dc servo motor or other special control motor, such as linear motor, should be used in the occasions of high speed regulation and control accuracy.According to the working mode and the conditions of the common ancestor environment, different types of structure are selected, such as frequently starting and stopping occasions using the hollow cup rotor structure of the servo motor, such as the speed requirements for more balanced occasions using large inertia servo motor.Power selection is not economical, too small motor overload and damage.For servo motors in continuous operation, the selected power shall be equal to or slightly greater than the power of the production machinery.For short-time working servomotors, the selected power may be equal to or slightly less than the power of the production machine, because a transient overload is allowed during operation.

The core of the stator is formed by the inner grooved silicon steel sheet, which generates a magnetic field by rotating. The rotor is subject to the action of the rotating magnetic field and thus rotates with the rotating magnetic field.An encoder is a device that compiles signals or data and converts them into signals that can be used for communication, transmission, and storage.It is installed in the rear end of the motor, and its turntable is coaxial with the motor.

can production line can production line can production line

can production line

Reasonable use of seam welding equipment and flanging equipment in can production line/beer can sealing machine

beer can sealing machine

Reasonable use of seam welding equipment and flanging equipment in can production line 

 

The can production line is equipped with seam welding equipment and flanging equipment, which are prepared for the welding and flanging of the cans respectively. Of course, it is necessary to correctly operate the equipment and strictly control the process, so as to avoid problems.So, how to use these two kinds of equipment in the can production line?

First talk about the use of seam welding equipment in the can production line, to make sure that the electrode pressure during seam welding has a greater impact on the size of the fusion core, the electrode pressure is too high will make the indentation is too deep, at the same time will accelerate the deformation and loss of the welding wheel;And insufficient pressure will produce shrinkage hole, and will contact resistance is too large, easy to make the welding wheel burn and shorten its service life.

Therefore, the size of the nuclear industry should be controlled by welding time, and the amount of overlap should be controlled by cooling time. At a low welding speed, the ratio of welding time to rest time is 1.25:1-2:1, and satisfactory results can be obtained.When the welding speed increases, the solder joint spacing increases, and this ratio must be increased in order to obtain a weld with the same amount of overlap.

Secondly, the welding speed determines the contact area between the welding wheel and the steel plate, as well as the contact time between the welding wheel and the heating part, thus affecting the heating and heat dissipation of the welding seam.When the welding speed increases, the welding current must be increased in order to obtain enough heat.

If the can production line is galvanized steel plate processing, in seam welding should pay attention to prevent cracks, the key is to choose the right process parameters.Practice has proved that the smaller the penetration rate, the fewer cracks and defects.When the seam welding speed is high, the heat dissipation condition is poor, the surface is too hot, the fusion depth is big, then easy to produce cracks.

At present, there are two kinds of flanging process in domestic can production line, one is rolling flanging;Another is mold flanging.Although the two flanging methods are different, the results are basically the same.

Depending on the production line of each can, there are many different flanging angles. In comparison, the larger the flanging Angle, the smaller the diameter of the flanging edge, the smaller the relative deformation, and it is not easy to crack when flanging.

Flanging equipment in the can production line, if the speed is slow, the force transfer is soft, so the possibility of rupture is much less, reduce the flanging quality problems.

can machine,can making machine,tin can making machine,can production line,can sealing machine,can seaming machine,beer can sealing machine

beer can sealing machine

Yixin Technology:Talking about Artificial Intelligence/can sealer sealing machine

 can sealer sealing machinecan sealer sealing machine can sealer sealing machine can sealer sealing machine

——Today, artificial intelligence is not as good as you hope and not as bad as you fear, but humanity is accelerating into a future that few can predict.

That’s why so many people are desperate to meet Kai-Fu Lee, the oracle of AI.

——AI will increasingly replace repetitive jobs. Not just for blue-collar work but a lot of white-collar work.

——What sort of jobs would be lost to AI?

——Basically, chauffeurs, truck drivers, anyone who does driving for a living, their jobs will be disrupted more in the 15 to 20-year time frame and many jobs that seem a little bit complex, chef, waiter, a lot of things will become automated.

We’ll have automated stores, automated restaurants, and altogether in 15 years, that’s going to displace about 40 percent of the jobs in the world.

——Forty percent of the jobs in the world will be displaced by technology?

——I would say displaceable.

——What does that do to the fabric of society?

——Well,in some sense,there is the human wisdom that always overcomes these technology revolutions.

The invention of the steam engine,the sewing machine,the electricity,have all displaced jobs.

And we’ve gotten over it.

The challenge of AI is this 40 percent,Whether it is 15 or 25 years, is coming faster than the previous revolutions.

——Do you think people around the world have any idea (of) what’s coming in artificial intelligence?

——I think most people have no idea. And many people have wrong idea.

——But you do believe it’s going to change the world.

——-I believe it’s going to change the world more than anything in the history of mankind,more than electricity.

Semi-automatic tin can seamer machine

 

An overview of the typical manufacturing process of three-piece tin metal packaging containers/can making machine

An overview of the typical manufacturing process of three-piece tin metal packaging containers

      There are two kinds of three-piece cans, cylindrical and special-shaped, and the forming process is basically the same.According to the different manufacturing process of the can body, there are three kinds of pressing can, bonding can and welding can.The difference of these three kinds of cans is that the processing method of the side seam of the can body is different.And can bottom,can lid, and can bottom and can lid and can body combined processing method is the same.

(1) pressure can.The can body of pressure and join can is to use the technology of old fashioned cut Angle, end fold, press flat to make, basically use at sealing the food jar that the requirement is not strict, but use less now.

(2) adhesive pot.The body of the adhesive can is manufactured by the technology of longitudinal seam bonding with organic adhesive.The melting adhesive, coating on the tank body lap joint or hook joint, after heating, pressure, cooling, so that the joint is closely bonded.There are two kinds of adhesive pressure and adhesive layer.

(3) welding can.Welding can is a metal can made by welding sealing the longitudinal seam of the can body.There are two kinds of welding methods: tin welding and resistance welding, among which tin welding has lead pollution problem, which is basically eliminated by resistance welding pot making process.

(4) can lid (bottom).Regardless of the method of making the can body, the process of making the top (bottom) of the can is basically the same.

can machine,can making machine,tin can making machine,can production line,can sealing machine,can seaming machine

GT4A28Q Pneumatic tin can sealer/tea can machine

The machine/tea can machine, using four rollers, can seal mental cans with various shapes and sizes just by manually putting the can, feeding by air cylinder and positioning. It’s the ideal equipment of can making line.tea can machine

tea can machine

tea can machine

tea can machine

GT4B188 Automatic square can sealing machine with eight rollers/can closing machine

This machine/can closing machine is mainly suitable for the metal square can’s sealing of 10L-18L paint drum、lubricating oil drum(a small amount of adjustment can be made as user’s requirement). It consists of one sealing machine、one lid feeding device and conveyor.The equipment,which is all controlled by PLC with low noise and long life span, has stable performance and is easy to handle,simple in structure.It’s the preferred production of canning line.

can closing machine

can closing machine

can closing machine

GT1B5B Can Slitting Machine/can maker machine line

The machine/can maker machine line suits for massive cut of tinplate or similar mental plate, which prepares for the process of can making.It works steadily and reliably, also has a long service life.can maker machine line

can maker machine line

can maker machine line

Front-feeding can seam welder machine/tin can body maker machine

This welding machine/tin can body maker machine is equipped with nitrogen spray welding seam protection system, which makes the welding seam more beautiful, and can also be equipped with internal and external coating machine and dryer. It is a necessary product for metal cans.

tin can body maker machinetin can body maker machine

tin can body maker machine

GT4A28Q Pneumatic tin can sealer/automatic can making machine

The machine/automatic can making machine, using four rollers, can seal mental cans with various shapes and sizes just by manually putting the can, feeding by air cylinder and positioning. It’s the ideal equipment of can making line.automatic can making machine

automatic can making machine

automatic can making machine